esxi写碟直接usbhdd
pve写碟用raw
freenas也是raw

原文https://www.cnblogs.com/biao-wu/p/13275486.html
亲测可用√

vim /usr/share/rpcd/acl.d/luci-base.json

{
"unauthenticated": {
    "description": "Allow system feature probing",
    "read": {
        "ubus": {
            "luci": [ "getFeatures" ]
        }
    }
},

"luci-base": {
    "description": "Grant access to basic LuCI procedures",
    "read": {
        "file": {
            "/": [ "list" ],
            "/*": [ "list" ]
        },
        "ubus": {
            "file": [ "list" ],
            "uci": [ "changes", "get" ]
        }
    },
    "write": {
        "cgi-io": [ "upload" ],
        "file": {
            "/etc/luci-uploads/*": [ "write" ]
        },
        "ubus": {
            "file": [ "remove" ],
            "uci": [ "add", "apply", "confirm", "delete", "order", "rename", "set" ]
        }
    }
},

加上下面这段

"uci-access": {
    "description": "Grant uci write access to all configurations",
    "read": {
        "uci": [ "*" ]
    },
    "write": {
        "uci": [ "*" ]
    }
},

结束

"luci-base-network-status": {
    "description": "Grant access to network status information",
    "read": {
        "ubus": {
            "luci-rpc": [ "getBoardJSON", "getHostHints", "getNetworkDevices", "getWirelessDevices" ],
            "network": [ "get_proto_handlers" ],
            "network.interface": [ "dump" ]
        },
        "uci": [ "luci", "network", "wireless" ]
    }
}

}

然后重启

上面图片用的是base64，因为不知道为啥传不了图，也懒得用图床
来源
https://blog.csdn.net/u012385481/article/details/53890030

[img相关]
img转qcow2命令
qemu-img convert -f raw -O qcow2 xxx(源img) xxx.qcow2
-O前面是源格式 后面是目标格式

check命令
qemu-img check xxx.qcow2

lede转换格式后会缩很多，这是正常现象

导入磁盘命令
qm importdisk 100（虚拟机编号） xxx.qcow2 local-lvm
虚拟机编号就是web后台左边树状图对应虚机前面的数字
local-lvm就是储存空间 我16g的盘给自动分了5个g

--
5#
local是pve自身用的，可以上传各系统ISO
lvm是虚拟机用的，包括创建的磁盘镜像，快照和备份
记得安装时用option可以选择lvm的大小，包括swap

https://koolshare.cn/thread-155427-1-1.html

[虚拟交换机相关]
创建虚拟交换机建议一次性添加好，要不然反复重启确实麻烦，不绑端口的虚拟交换机建议多加几个，防止不够用的尴尬事，反正放着也不碍事

在“网络”里创建一个“Linux bridge"
不填写“桥接端口”就是内部交换机
桥接端口填物理网卡名称
多个网口绑一个虚拟交换机就在添加“桥接端口”的时候加个空格